Ionic Foot Bath

You may have heard of the "ionic foot bath" in one form or another. The basic concept is that you immerse your bare feet in a basin of tepid saline water. Electrodes are then placed in the water with (but not touching) your feet. The process is supposed to "magnetically" and "ionically" draw "toxins" from the pores of your feet. These "toxins" and "heavy metals" then color the water, and you can visibly see these things leaving your body. 1/2 hour treatment.

Instructions

Things You'll Need:

• Large plastic bucket
• Ionic foot bath kit
• Table salt

1. 1
   Clean your bucket very thoroughly. Most ionic foot bath kits come with a bucket, but if yours doesn't, any plastic bucket will work. To get the most out of your sessions you will need to clean the bucket each time. Avoid using any type of metal bucket or bucket with metal-based paint as this will lessen the effectiveness of your sessions. Also avoid anything with metal screws or handles as the charge will still be focused from the ionic module to these metal items.
2. 2
   Connect the cords to your bucket. You should consult your manual that came with the kit to make sure that you have everything set up correctly; however, most ionic foot bath kits work using the same type of cords and principles. This involves one cord at one end of the bucket that serves as a positive, and another at the other end to complete the circuit and form the negative side.
3. 3
   Place your ionic array model into the middle of the bucket. Center the module and make sure that you have enough room on each side to comfortably slide your feet into the bucket.
4. 4
   Fill the basin with tap water. You want the bucket to be full enough so that the ionic array model is completely submerged, but you do not need to fill it all the way.
5. 5
   Wipe down your feet with a towel and soap before beginning your session. Cleaning away any loose debris and dirt will allow the ionic foot bath to clean more efficiently.
6. 6
   Add one tbsp. of salt to the bucket and submerge your feet. Turn on your ionic foot bath machine and wait the amount of time given in the ionic foot bath manual before turning off the machine.

In a common plastic bucket, you place the metal array in clean water that has a little sea salt in it. The array puts out a very small current with positive and negative ions that circulate through the body. The oppositely charged toxins attach to them and by osmosis the toxins are pulled out through the pores of the feet. The clean water starts to change color depending on what organs are detoxing.
Dark brown/black- is the liver detoxing
Orange- the joints
Yellow- urinary tract
Dark green- gallbladder
Black flecks- heavy metals
Red flecks-blood clot material
White foam- lymph nodes draining
In all fairness, the water will change color to some degree without feet in it because the metal, water, salt and minerals will react. But what you are looking for is the sludge that floats on the top of the water that stains the sides of the bucket. We found some independent studies done with and without feet and it showed the mucus in the water that just the water, salt and the metal array wouldn't produce by itself.